Please follow these instructions when using the MAXTRAX Mounting Pin Set:
Ensure all 4 pins are used for mounting.
Layout dimensions. Please note: Manufacturing tolerances (of +/-1%) may affect these dimensions slightly so please check these dimensions against your MAXTRAX before drilling.
Pins MUST be mounted vertically so that the MAXTRAX are carried horizontally.
Please note: You will need to trim 15mm off the thread for use in channel-type roof bars.
Ensure pins are aligned so that the padlock hole in the top ‘knuckle’ is visible once the MAXTRAX are locked down.
For additional security, fit a small padlock through the most easily-accessible mounting pin.
A wire combination padlock is the best option (they are readily available and you can’t lose the key!).